Genuitec » All Posts https://www.genuitec.com/forums/topics/webclipse/community/feed/ Sun, 20 May 2018 04:35:08 +0000 http://bbpress.org/?v=2.5.14-6684 en-US https://www.genuitec.com/forums/topic/project-test-a-is-not-an-angular-cli-project/#post-586444 <![CDATA[Reply To: Project test-a is not an Angular CLI project]]> https://www.genuitec.com/forums/topic/project-test-a-is-not-an-angular-cli-project/#post-586444 Wed, 16 May 2018 15:03:53 +0000 Brian Fernandes You’re right – we do have a compatibility issue with Angular 6, one of the reasons being the change from .angular-cli.json to angular.json. You’ve applied a fine workaround for now.

The good news is that we have these issues fixed and will be releasing an update to Angular IDE tomorrow which will be more compatible with this release.

Apologies for the inconvenience caused.

]]>
https://www.genuitec.com/forums/topic/project-test-a-is-not-an-angular-cli-project/#post-586418 <![CDATA[Project test-a is not an Angular CLI project]]> https://www.genuitec.com/forums/topic/project-test-a-is-not-an-angular-cli-project/#post-586418 Wed, 16 May 2018 11:50:34 +0000 mpwillia401 Recently I upgraded to angular CLI 6.0.1. After upgrading the Angular IDE for Webclipse would no longer run my project called “test-a”. It would give me the error “Project test-a is not an Angular CLI project”. I believe the problem roots with the change Angular made to .angular-cli.json. In Angular CLI 6.0.+ .angular-cli.json was renamed to angular.json. To get the Angular IDE for Webclipse to work again I had to create a soft link in the file system.

]]>
https://www.genuitec.com/forums/topic/cannot-create-project/#post-586214 <![CDATA[Reply To: Cannot create project]]> https://www.genuitec.com/forums/topic/cannot-create-project/#post-586214 Tue, 15 May 2018 10:47:36 +0000 support-swapna oyesiji,

Can you please recheck the Terminal+ (not the Terminal) view when you try creating an Angular project? Please click ‘No’ on the popup which tells you that the project cannot be created and if you want to delete it. Make sure you are selecting the just failed project in the Terminal+ view and check the output.

If possible, please also share with us the screenshot of the Terminal+ view for the failed project to help us get a visual.

Did anything change in your machine recently apart from upgrading the Webclipse version like applying updates to your machine etc?

Apologies for inconvenience caused. We hope to sort out this issue soon.

–Swapna
Genuitec Support

]]>
https://www.genuitec.com/forums/topic/cannot-create-project/#post-586012 <![CDATA[Reply To: Cannot create project]]> https://www.genuitec.com/forums/topic/cannot-create-project/#post-586012 Mon, 14 May 2018 13:18:23 +0000 oyesiji Thanks for your reply
1) There is no output in the Terminal/error Log
2) Yes i am behind a proxy but then was still able to create an angular project using the old subclipse

]]>
https://www.genuitec.com/forums/topic/cannot-create-project/#post-586007 <![CDATA[Reply To: Cannot create project]]> https://www.genuitec.com/forums/topic/cannot-create-project/#post-586007 Mon, 14 May 2018 12:54:42 +0000 support-swapna oyesiji,

Sorry that you are seeing this issue.

1. Can you please share with us the complete output of the Terminal+ view when you try to create an Angular project? Also share with us the workspace log by clicking on ‘Export Log’ icon in the Error Log view to help us check if any errors are logged during project creation.

2. Are you behind a firewall or proxy? If yes, then did you set the correct details in the Window > Preferences > General > Network Connections page?

Apologies for inconvenience caused.

–Swapna
Genuitec Support

]]>
https://www.genuitec.com/forums/topic/cannot-create-project/#post-585727 <![CDATA[Cannot create project]]> https://www.genuitec.com/forums/topic/cannot-create-project/#post-585727 Sat, 12 May 2018 01:28:10 +0000 oyesiji I am on windows and anytime i try to create project i always get this error,

Upexpected exit value executing
npm install @angular/cli@1.6.5 (exit value:-1)

was not getting this in old version of subclipse

Attachments:
You must be logged in to view attached files.
]]>
https://www.genuitec.com/forums/topic/angular-ide-causes-path-issues-with-webclipse/#post-585248 <![CDATA[Reply To: angular-ide causes path issues with WebClipse?]]> https://www.genuitec.com/forums/topic/angular-ide-causes-path-issues-with-webclipse/#post-585248 Tue, 08 May 2018 14:41:37 +0000 support-swapna Chander,

Sorry that you are seeing this problem. Thank you for reporting it.
We are working on putting out a release with Angular 6 support shortly. We will keep you posted about it.

Apologies for inconvenience caused.

–Swapna
Genuitec Support

]]>
https://www.genuitec.com/forums/topic/angular-ide-causes-path-issues-with-webclipse/#post-585235 <![CDATA[angular-ide causes path issues with WebClipse?]]> https://www.genuitec.com/forums/topic/angular-ide-causes-path-issues-with-webclipse/#post-585235 Tue, 08 May 2018 13:18:03 +0000 chander.ganesan I’m using WebClipse for an angular 5 project. I recently upgraded to Angular 6 and find now that the PATH causes the “ng” command in angular-ide to be found before the @angular/cli version of the same command.

I’ve upgraded all the dependencies, and when I run the “ng” command referenced in node_modules/.bin , everything works perfectly.

However, via Eclipse the project seems to run the wrong command, and I get this error:

This seems due to the fact that when running webclipse the path is set to include the path to angular-ide (which has it’s own ng command) rather than angular-cli .

If I do a npm install -g @angular/cli then things will work – but I shouldn’t need to update the global install…

]]>
https://www.genuitec.com/forums/topic/bootrap-css-disable-codelive/#post-583087 <![CDATA[Reply To: Bootrap.css disables codelive]]> https://www.genuitec.com/forums/topic/bootrap-css-disable-codelive/#post-583087 Fri, 27 Apr 2018 09:28:37 +0000 support-swapna Heku,

Sorry that you are seeing this issue. I could replicate the problem with CodeLive panel at my end.
I have filed a bug for the dev team to work on it. We will keep you posted when the fix is out.

Apologies for inconvenience caused. Please let us know if you see any other issues.

–Swapna
Genuitec Support

]]>
https://www.genuitec.com/forums/topic/bootrap-css-disable-codelive/#post-582960 <![CDATA[Bootrap.css disables codelive]]> https://www.genuitec.com/forums/topic/bootrap-css-disable-codelive/#post-582960 Thu, 26 Apr 2018 12:39:46 +0000 hekude Hello,

with @import “~bootstrap/dist/css/bootstrap.css”; @style.css the codelive panel is still visible but without functionality.

Will there be an update to fix this issue?

kind regards
HeKu

]]>
https://www.genuitec.com/forums/topic/usrbinbash-exe-fatal-error-cygheap-base-mismatch-detecte/#post-582539 <![CDATA[Reply To: \usr\bin\bash.exe: *** fatal error – cygheap base mismatch detecte]]> https://www.genuitec.com/forums/topic/usrbinbash-exe-fatal-error-cygheap-base-mismatch-detecte/#post-582539 Tue, 24 Apr 2018 09:23:42 +0000 support-swapna Hi,

Sorry that you are seeing this issue. This error is caused because the Git bash path is incompatible with Cygwin.

1. Do you remember running the Windows update recently around the same time when you updated Webclipse?

2. Search for cygwin1.dll using the Windows Start->Find/Search facility
and delete all but the most recent version. The most recent version *should*
reside in x:\cygwin\bin, where ‘x’ is the drive on which you have
installed the cygwin distribution. Rebooting is also suggested if you
are unable to find another cygwin DLL.

Can you please clarify if you have followed the instructions in the error message which I have pasted above for your convenience? If no, then please check. Also try rebooting your machine (some of the users seeing similar problem got it fixed with reboot) and check if it helps fix the problem.

3. If it does not help, then please delete the git-bash folder under the .webclipse folder located in your user home directory and a fresh copy of git-bash will be downloaded automatically when you access the Terminal+ view.

4. If none of the suggestions help, then please let us know when exactly you are seeing the errors and if you have Cygwin installed in your machine.

Apologies for inconvenience caused. Please let us know how you get on with this problem.

–Swapna
Genuitec Support

]]>
https://www.genuitec.com/forums/topic/usrbinbash-exe-fatal-error-cygheap-base-mismatch-detecte/#post-582414 <![CDATA[\usr\bin\bash.exe: *** fatal error – cygheap base mismatch detecte]]> https://www.genuitec.com/forums/topic/usrbinbash-exe-fatal-error-cygheap-base-mismatch-detecte/#post-582414 Mon, 23 Apr 2018 13:59:41 +0000 iambogus Update webclipse last week and see bach errors.

Installed versions:
Webclipse Foundation 1.11.0.201804182024 com.genuitec.eclipse.webclipse.commons.feature.feature.group Genuitec, LLC
Webclipse JavaScript Debugger 1.11.0.201804182024 com.genuitec.eclipse.webclipse.jsdebugger.feature.feature.group Genuitec, LLC
Webclipse JSjet 1.11.0.201804182024 com.genuitec.eclipse.webclipse.jsjet.feature.feature.group Genuitec, LLC

Error message:

0 [main] bash (20180) C:\Users\myuser\.webclipse\git-bash\bin\..\usr\bin\bash.exe: *** fatal error – cygheap base mismatch detecte
d – 0x3696408/0x32A6408.
This problem is probably due to using incompatible versions of the cygwin DLL.
Search for cygwin1.dll using the Windows Start->Find/Search facility
and delete all but the most recent version. The most recent version *should*
reside in x:\cygwin\bin, where ‘x’ is the drive on which you have
installed the cygwin distribution. Rebooting is also suggested if you
are unable to find another cygwin DLL.
1 [main] bash 12132 fork: child -1 – forked process 20180 died unexpectedly, retry 0, exit code 0xC0000142, errno 11
bash: fork: retry: No child processes
0 [main] bash (2548) C:\Users\myuser\.webclipse\git-bash\bin\..\usr\bin\bash.exe: *** fatal error – cygheap base mismatch detected
– 0x3696408/0x32E6408.
This problem is probably due to using incompatible versions of the cygwin DLL.
Search for cygwin1.dll using the Windows Start->Find/Search facility
and delete all but the most recent version. The most recent version *should*
reside in x:\cygwin\bin, where ‘x’ is the drive on which you have
installed the cygwin distribution. Rebooting is also suggested if you
are unable to find another cygwin DLL.
1050925 [main] bash 12132 fork: child -1 – forked process 2548 died unexpectedly, retry 0, exit code 0xC0000142, errno 11
bash: fork: retry: No child processes
0 [main] bash (15068) C:\Users\myuser\.webclipse\git-bash\bin\..\usr\bin\bash.exe: *** fatal error – cygheap base mismatch detecte
d – 0x3696408/0x32C6408.
This problem is probably due to using incompatible versions of the cygwin DLL.
Search for cygwin1.dll using the Windows Start->Find/Search facility
and delete all but the most recent version. The most recent version *should*
reside in x:\cygwin\bin, where ‘x’ is the drive on which you have
installed the cygwin distribution. Rebooting is also suggested if you
are unable to find another cygwin DLL.
3105542 [main] bash 12132 fork: child -1 – forked process 15068 died unexpectedly, retry 0, exit code 0xC0000142, errno 11
bash: fork: retry: No child processes
1 [main] bash (9156) C:\Users\myuser\.webclipse\git-bash\bin\..\usr\bin\bash.exe: *** fatal error – cygheap base mismatch detected
– 0x3696408/0x32D6408.
This problem is probably due to using incompatible versions of the cygwin DLL.
Search for cygwin1.dll using the Windows Start->Find/Search facility
and delete all but the most recent version. The most recent version *should*
reside in x:\cygwin\bin, where ‘x’ is the drive on which you have
installed the cygwin distribution. Rebooting is also suggested if you
are unable to find another cygwin DLL.
7161014 [main] bash 12132 fork: child -1 – forked process 9156 died unexpectedly, retry 0, exit code 0xC0000142, errno 11
bash: fork: retry: No child processes
0 [main] bash (20644) C:\Users\myuser\.webclipse\git-bash\bin\..\usr\bin\bash.exe: *** fatal error – cygheap base mismatch detecte
d – 0x3696408/0x32F6408.
This problem is probably due to using incompatible versions of the cygwin DLL.
Search for cygwin1.dll using the Windows Start->Find/Search facility
and delete all but the most recent version. The most recent version *should*
reside in x:\cygwin\bin, where ‘x’ is the drive on which you have
installed the cygwin distribution. Rebooting is also suggested if you
are unable to find another cygwin DLL.
15217721 [main] bash 12132 fork: child -1 – forked process 20644 died unexpectedly, retry 0, exit code 0xC0000142, errno 11
bash: fork: Resource temporarily unavailable

]]>
https://www.genuitec.com/forums/topic/ng-new-project-skip-git-stylescss-router/#post-582019 <![CDATA[Reply To: ng new project –skip-git –style=scss –router]]> https://www.genuitec.com/forums/topic/ng-new-project-skip-git-stylescss-router/#post-582019 Sat, 21 Apr 2018 07:51:45 +0000 Brian Fernandes No problem Marvin, have a great weekend!

]]>
https://www.genuitec.com/forums/topic/ng-new-project-skip-git-stylescss-router/#post-581946 <![CDATA[Reply To: ng new project –skip-git –style=scss –router]]> https://www.genuitec.com/forums/topic/ng-new-project-skip-git-stylescss-router/#post-581946 Fri, 20 Apr 2018 20:11:57 +0000 Marvin Toll hmmm… did not realize that an Angular Import was available (and so obvious)… that sounds like the best way to deal with the hard-coded “ng new <project>” limitation for now. Please presume that works well unless I post back otherwise. [Thanks Brian]

]]>
https://www.genuitec.com/forums/topic/ng-new-project-skip-git-stylescss-router/#post-581940 <![CDATA[Reply To: ng new project –skip-git –style=scss –router]]> https://www.genuitec.com/forums/topic/ng-new-project-skip-git-stylescss-router/#post-581940 Fri, 20 Apr 2018 19:09:30 +0000 Brian Fernandes Marvin,

You can add any files you like post project creation – however, since you’re adding them manually, making sure they are correctly hooked up to your existing source will be your responsibility.

Another option would be to create the project outside Angular IDE, use the angular-cli on the command line with the arguments you want. the project is created by the CLI, import it into Angular IDE using the File > Import > Angular > Angular Project wizard.

Hope this helps.

]]>