Missing Eclipse 2.x PVCS Integration with Eclipse 3.0?

  1. MyEclipse IDE > Comments

Tagged: 

This topic contains 27 replies, has 15 voices, and was last updated by  asbutvnmphi 4 years ago.

Viewing 13 posts - 16 through 28 (of 28 total)
  • Author
    Posts
  • #224384 Reply

    jadeblue
    Member

    I finally managed to install PVCS plugin. Thanks to all the directions jasonhobbs has posted, but now I am getting, SCC_E_INITIALIZEFAILED error message when I try to run VM from the Merant Menu. Does any one have a clue how to fix this?

    #224390 Reply

    luisgois
    Member

    @allanws wrote:

    @jasonhobbs wrote:

    7.5 and up seem to work OK with Eclipse 3 after performing the above steps. I don’t know much about Tracker, but the PVCS plugin does have some additional functionality other than just version control. I believe it has some sort of ‘watcher’ (if that’s what tracker is) where it’ll watch a repository for changes etc…

    Does anybody know how I set “default upload rules” ? When I try to add some item to Dimensions the following message comes up to Merant console:

    Could not locate default upload rules.
    Run IDE Setup and load the default rules.
    Error: Invalid Rule Base

    Tks in advance

    Allan

    Hello, Allan.

    You’ll have to do exactly what the message says : load default upload rules, where some of them are related to eclipse (%.java, %.xml … and not much more). See your Dimensions documentation on how to upload default rules (I think it’s in the same manual where you can find details on all the IDEs supported).

    Best regards,
    Luis

    #224392 Reply

    luisgois
    Member

    @jadeblue wrote:

    I finally managed to install PVCS plugin. Thanks to all the directions jasonhobbs has posted, but now I am getting, SCC_E_INITIALIZEFAILED error message when I try to run VM from the Merant Menu. Does any one have a clue how to fix this?

    If using WSAD integration with Dimensions, I’ve found that using Eclipse 3M2 one can experience irregular behaviour (at least a different behaviour from that found with Eclipse 2.1).

    Best regards,
    Luis

    #225405 Reply

    shivani
    Member

    hi,

    i want to compare the VM 7.5 vs 8.0, and i’m new to VM 7.5 as well (was using clearcase previously)…
    could anyone help me in what all features are new and improved in VM 8.0 ?

    we are corrently using VM7.5.1.0 and are planning to upgrade to 8.0, now i’ve to evaluate 8.0 against 7.5 … what all scenarios are there to be compared b/w the two of these ?
    we would also be going for eclipse very shortly for few projects on java

    thnx in advance
    -shivani

    #231076 Reply

    Jason Hobbs
    Participant

    7.5.1.0 -> 7.5.1.5 patch:
    http://sos.serena.com/kb/articles/version%20manager/kb70206.asp

    7.5.1.5 to 7.5.2.7 patch:
    http://sos.serena.com/kb/articles/version%20manager/kb70565.asp

    …Hope that helps some people who are not finding the patches.

    #247527 Reply

    Hi,
    Thanks for the useful info regarding Eclipse 3.1.x and PVCS integration.
    I followed the steps and hit the SCC_E_INITIALIZEFAILED error.
    It turned out that PVCS Source Control connectivity was disabled.
    To enable it, under Start -> Programs -> PVCS VM Development Interface -> Select PVCS Provider, ensure that PVCS Source Control option is selected. Mine was by default Set to disable source control.
    restart Eclipse, error gone and all is rosy!
    Hope this helps anyone who stumbles across this thread as I did!

    #247742 Reply

    Does anyone have patch for upgrade
    PVCS Version Manager in Windows from 7.5.1.0 -> 7.5.1.5 patch
    7.5.1.5 to 7.5.2.7 patch

    I cannot find the patch and I need it for using Eclipse 2.1 plugin for PVCS VM 7.5.1

    Your help is highly appriciate!!!

    #262497 Reply

    debopamg
    Member

    Hi All,
    Can someone tell me where I can find the PVCS plugin for eclipse 3.2. I already have Version Manager 6.7.00 installed in my machine.

    Thanks & Best Regards,
    Debopam.

    #262507 Reply

    Scott Anderson
    Participant

    Debopam,

    I looked around and only found such a thing on the Serena site here: http://www.serena.com/US/products/pvcs/pvcs-version-manager.aspx

    If you’re already a Serena customer, which you appear to be since you have Version Manager 6.7 installed, I’d suggest the easiest way to get what you want is to contact Serena directly.

    #262515 Reply

    Hi,

    You can using PVCS VM 7.5 for integration with Eclipse 3.0 by :

    In you eclipse install folder, in the links folder

    create a file called com.merant.team.pvcs.link
    containing:

    path=C:\\Program Files\\PVCS\\vm\\devint\\eclipse2.1

    (obviously correct any path here you might have used differently)

    Copy the org.apache.xerces_4.0.13 plugin folder from eclipse 2.1 to your eclipse 3 plugins folder

    And You will see the PVCS menu in Eclipse 3.0

    #325539 Reply

    Sachin
    Member

    a) Please run the following utility: Windows “Start” menu | All Programs | Serena | Dimensions CM 10.1.2 | Administration Tools | SCC Diagnostics
    o From “Dimensions SCC Diagnostics” dialog, select control button “Test”

    You should see a response similar too:

    Testing….
    OK: Found SCCServerName value is Dimensions SCC
    OK: Found SCCServerPath value is C:\Program Files\Serena\Dimensions 10.1\CM\prog\sccpcms.dll
    Serena Dimensions CM SCC Interface is OK

    b) If you don’t see this response, copy results to an email. You can also continue analyzing the setup by starting “Regedit” from a “Command Prompt”:
    o Look for the registry value string for subkey: HKEY_LOCAL_MACHINE\SOFTWARE\SourceCodeControlProvider\ProviderRegKey
    The value should be: SOFTWARE\Serena\Dimensions\10.1\PcmsScc
    o Look for the registry value string for subkey: HKEY_LOCAL_MACHINE\SOFTWARE\Serena\Dimensions\10.1\PcmsScc\SCCServerName
    The value should be: Dimensions SCC
    o Look for the registry value string for subkey: HKEY_LOCAL_MACHINE\SOFTWARE\Serena\Dimensions\10.1\PcmsScc\ SCCServerPath
    The value should be: C:\Program Files\Serena\Dimensions 10.1\CM\prog\sccpcms.dll

    After this restart IDE & your problem will be solved.

    #325560 Reply

    support-swapna
    Moderator

    SachinMalvi,

    Thank you for posting it. It will surely help other users.

    #491341 Reply

    asbutvnmphi
    Participant

    http://amitriptyline.red/ – amitriptyline http://clonidine-0-1mg.trade/ – clonidine 0.1mg http://losartanhydrochlorothiazide.webcam/ – losartan hydrochlorothiazide http://orderviagraonline.trade/ – order viagra on line http://tentex.trade/ – tentex royal http://valtrex.gdn/ – valtrex http://buy-ventolin.webcam/ – buy ventolin inhaler online

Viewing 13 posts - 16 through 28 (of 28 total)
Reply To: Missing Eclipse 2.x PVCS Integration with Eclipse 3.0?

You must be logged in to post in the forum log in