No Application Server connectors available [Closed]

MyEclipse IDE

Installation, Configuration & Updates

This topic has 3 replies, 2 voices, and was last updated 20 years, 5 months ago by support-michael.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
November 14, 2003 at 11:20 am #200048 Reply

rpray
Member

I have just downloaded MyEclipse and installed it. I don’t have any application servers in my preferences so I can’t configure them. Is there something else I have to load or did the install just mess up? Supposedly MyEclipse has 20 application server connectors. Currently, I have 0.

thanks,
Rick

November 14, 2003 at 4:48 pm #200069 Reply

support-michael
Keymaster

Rick,

Can you provide the basic posting info:
http://www.myeclipseide.com/index.php?name=PNphpBB2&file=viewtopic&t=394&sid=456ed97e14c29d7e67e01e7c1191e15f

In the meantime I’ll hazard a guess that you may not have an Eclipse SDK installed but rather just an Eclipse Platform. MyEclipse requires a full Eclipse SDK to operate properly. Following is a thread from a former case in which this occured:
https://www.genuitec.com/forums/topic/configuration-problem-with-myeclipse-3-61-closed/&highlight=sdk&sid=5016bc7a888b449e1493b51399123bdf

Michael
MyEclipse Support

November 14, 2003 at 5:23 pm #200072 Reply

rpray
Member

I was using eclipse version 2.1.2 and apparently the latest version that you can download for trial is not compatable with that version. I installed eclipse 2.1.1 and tried it again and it worked fine. Thanks anyway.

November 14, 2003 at 5:45 pm #200073 Reply

support-michael
Keymaster

Actually the latest MyEclipse version, 2.6.4 was tested on all versions of Eclipse 2.1.x and no such problems were detected. I’m wondering if your former installation was not a full E2.1.2 SDK. Regardless it sounds like you’re off a running.

Happy MyEclipse-ing,

Michael
MyEclipse Support
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)